How To Clean The Window On A Maytag Oven Door

Does your oven take spills inside the front end door, between the drinking glass? Information technology seems like there's no way to get in there to clean it, but I found a fashion!

Today might not exist one of my most artistic and creative posts, but since I'm getting my business firm set to sell, you lot guys will have to bear with me equally I drag you lot through some home maintenance with me.

The good news is if you lot have a Maytag oven (or similar drinking glass front oven) you can benefit from my messes.

Disclaimer: Since posting this hack, I've had a few people chastise me in the comments section for doing information technology wrong. I NEVER want to lead you guys astray, and just because it worked for me may not hateful it will piece of work for anybody.

So read on, and if you try this at home, just be certain non to forcefulness anything. And for a fiddling chuckle at my expense, likewise as some good advice, read the comments for what other people (probably smarter than me) think. Finally, just remember… glass is brittle.

Cleaning Inside your Maytag Oven Door

Some time in the past (I'yard aback to say how long, so let'southward pretend it was last week), something I was cooking on the stove boiled over and spilled, non but downwards the front of my oven door, but actually within the vents and between the drinking glass. No corporeality of that oven cleaning itself was going to get that mess out.

Plus, when the lord's day streamed through the kitchen during the solar day, it highlighted all the dust that had also accumulated (last week) inside the glass. Something had to be washed earlier showing off my almost spotless kitchen to prospective buyers.

But when I searched online, I couldn't find whatever tutorials that talked nearly how to take autonomously my particular type of oven, nor was in that location annihilation in the Maytag manual. (Maybe they don't want you doing this yourself, just that never stopped me before.)

And so I figured it out myself, and information technology was so surprisingly easy I had to share it with you.

(Forgive me for not having whatsoever "before" pictures and believe me when I say information technology was bad. I was just on such a tear to get that thing pulled apart that I only started taking pictures once I realized that I should preserve the process for posterity.)

Removing the Drinking glass Door:

Apparently some oven doors come in 2 parts. This ane is really all ane role (more than or less), with a large canvass of drinking glass on the front that's held on by a ledge running along the lesser, and the frame of the door on meridian.

When I started unscrewing screws, I got several removed before I realized I didn't need nigh of them. So I put them all dorsum in and got on with the actual productive part. Here information technology is in three piece of cake steps.

one. Open up the oven door slightly, to the point where it naturally rests open up a few inches. Remove the three screws from the peak of the door and set them aside.

2. Slightly elevator the meridian frame section of the door. Information technology won't come off, but it will rock up a lilliputian bit, just enough so it's non belongings the glass from the superlative.

(At this point I felt like I was doing information technology wrong and was about to suspension something, then I went back to unscrewing things which didn't help at all. In the finish I realized the top only needed to stone back about a quarter of an inch to clear the glass and permit it to swing out.)

3. Gently grasp the drinking glass on each side and pull up from the bottom ledge. The drinking glass may exist difficult to remove because it has a few footling adhesive pads forth the sides. Just work it gently out and set information technology aside on a blanket or the carpet.

Whew! That wasn't so bad. At present all you have to do is accept a petty glass cleaner to the within of the glass. (I used Spic and Span first to degrease, then finished with drinking glass cleaner to clear off all the streaks.)

Then do the front end of the door that's nevertheless attached to the oven. I likewise dusted all around the inside of the door. There was a lot of gunk built upward in the springs and along the lesser ledge, just that came right off with a paper towel and some Spic and Bridge.

While yous're cleaning the door, make sure you lookout man out for exposed screws. Those suckers are precipitous!

The grit and crud is gone, thanks to several paper towels, a tooth castor, and a chopstick for those hard-to-reach spots.

Replacing the Glass Door:

1. In one case you've cleaned both the within of the door, and the within of the drinking glass front end, you can gently set the glass back in the lesser ledge, middle it, and lay it flat against the door.
2. Elevator up the superlative edge of the door once again, tilt the drinking glass in, and let the summit clamp down over the glass.
3. Replace the three screws and screw them in squeamish and tight, and you're washed!

Of a sudden your trashy looking oven is all clean and sparkly once more, ready to wow your prospective home buyers, or at to the lowest degree your guests. At this point, it's probably a good idea to run a self-cleaning cycle, so it's truly clean inside and out.

At present that the kitchen's prepare to go, next calendar week we're moving on to baseboards! I know you're hooked now, and so programme on coming back for that riveting tutorial…

ABOUT MEREDITH

Creating a color-filled life. Conquering my fiddling globe i DIY project at a fourth dimension. With lots of coffee and chocolate. Albuquerque NM. Pinterest ~ Instagram ~ Facebook

Source: https://thepalettemuse.com/how-to-clean-between-the-glass-door-of-your-maytag-oven/

Posted by: branchcouchisem.blogspot.com

Share this post